Hi guys. I'm really, REALLY interested in learning to play with glass & have been doing quite a bit of research. Please bear with me because I' ve never actually seen the jobs I'm about to mention (just on magazines). Plus you don't ever see this stuff down here...
1. David Smith's Bull & Brush panel- how do I make the "Bull & brush" text look rounded? Is it blasted deeper than the rest of the panel?
2. Also David Smith's: Are the centers of the text in the "Camelot" piece damar embossed? How are the swirlies on the very center of the "C" accomplished?
3. Can I chip a piece, paint it with transparent ink & then gild? If so, would this be better accomplished by silvering or can I use leaf? If the latter, which leaf? White gold?
4. Can I screenprint varnish for matte centers (so the edges look sharp)?
5. Doug Bernhardt's 98 Conclave & The Black Thorn Café pieces: The silver area (top) of the letters- How is this accomplished? How are they etched & gilded?
6. On AMAL 3-1, the "Spring Tonic" piece: What's the glittery stuff surrounding the MOP?
7. Also on AMAL 3-1, page 20. James Mitchell's "Tracks to Jack's" piece shows a trim that looks like leaded glass. Is this the case? If not, what is it?
Thank you all for your time!
Welcome to The Hand Lettering Forum!
This is an interactive Bulletin Board on the topics of Sign making, design, fabrication, History, old Books and of coarse Letterheads, Keepers of the craft. The Hand Lettering Forum features links to resources, sign art history, techniques, and artists profiles. Learn more about Letterheads at https://theletterheads.com. Below you'll see Mchat has been added as a live communication portal for trial, and the Main forum Links are listed below.
This is an interactive Bulletin Board on the topics of Sign making, design, fabrication, History, old Books and of coarse Letterheads, Keepers of the craft. The Hand Lettering Forum features links to resources, sign art history, techniques, and artists profiles. Learn more about Letterheads at https://theletterheads.com. Below you'll see Mchat has been added as a live communication portal for trial, and the Main forum Links are listed below.
A few glass / gold questions
Moderators: Ron Percell, Mike Jackson, Danny Baronian
-
- Posts: 57
- Joined: Mon Apr 25, 2005 10:36 am
- Location: Luquillo, Puerto Rico
- Contact:
A few glass / gold questions
Work hard, party like a tourist!
-
- Posts: 1213
- Joined: Thu Apr 08, 2004 4:18 am
In response to your question #3, I have used the technique of airbrushing a transparent glaze (transparent screen ink in varnish) over glue chipped areas, then water gilding it, as was done on the green fade in the letter centers of "Neptune". After the glaze is dry, it was water gilded with 12K gold. It could be gilded with any karat gold. Solution gilding would not be practical. The photo isn't the greatest, but in person it looks quite lovely. It's best to have the glaze strong in color so you can achieve the desired tone with the minimum amount of glaze. Too much glaze will fill in the crevasses of the glue chip and you will lose the fine details. This effect can also be done over textured acid etching. You might want to try it out on a sample piece prior to the execution of the real thing.
I've also used bronze powder over glue chipping as is the border portion of this sign.
I've also used bronze powder over glue chipping as is the border portion of this sign.
-
- Site Admin
- Posts: 1705
- Joined: Tue Apr 06, 2004 11:02 pm
- Location: Jackson Hole, WY
- Contact:
Hi Felix,
Wow! Lots of questions in one post! While not absolutely necessary, you might consider asking some in individual posts so it would be easier to keep all the answers straight and be easier for people to tackle.
Good luck,
Mike Jackson / site co-host
Wow! Lots of questions in one post! While not absolutely necessary, you might consider asking some in individual posts so it would be easier to keep all the answers straight and be easier for people to tackle.
Good luck,
Mike Jackson / site co-host
Mike Jackson / co-administrator
Golden Era Studios
Vintage Ornamental Clip art
Jackson Hole, WY
Photography site:
Teton Images
Jackson Hole photography blog:
Best of the Tetons
Golden Era Studios
Vintage Ornamental Clip art
Jackson Hole, WY
Photography site:
Teton Images
Jackson Hole photography blog:
Best of the Tetons
-
- Posts: 57
- Joined: Mon Apr 25, 2005 10:36 am
- Location: Luquillo, Puerto Rico
- Contact:
Thanks guys. Beautiful pieces, Larry. I know what you mean by not the greatest photos. Before I had ever seen a chipped panel in real life my thoughts on the matter were a mere "cool". I went to Rick Dolphens' meet & John Parker Sr. pulled out this little 8" x 10" or so panel it really blew my mind! Same thing happend a couple months ago when I went to Dave Correll's shop & saw his "Depot" piece. I can't wait to get the show on the road!
Thanks again!
Thanks again!
Work hard, party like a tourist!
-
- Posts: 1213
- Joined: Sat Jul 10, 2004 11:12 am
- Location: ENGLAND
Hi Felix.
The centers on the Camelot glass are Damar embossed . The swirling design was made using a fork and the occasional use of a brush handle.There are other tools you can use to get all-sorts of effects.
On the Bull and Brush glass the letters were deep blasted . They are blasted very deep, nearly through to the other side. Try and avoid going this deep you can get the same effect at a more shallow depth of blasting plus it's some times harder to gild into the deeper sections of the blasting. I then applied 3 coats of 1 shot's Sign Restoring clear ,let it all dry then water gilded the letters in 23crt gold. Finally I finished with one more coat of varnish to stop any bleed through of the final coat of metallic 1 shot gold.
I like to use the Sign restoring clear because when I come to scraping the varnish off it removes easily without chipping into the gilded areas of the letters. Some of the other varnishes tend to be more brittle when it comes to scraping plus it leaves a more richer gold to the letters because of it's slightly yellow colour . There are other ways but this way works well for me. Hope this helps you Felix
John Studden is your man for screened letter centres ,he as some nice little tips on this technique.
Dave
The centers on the Camelot glass are Damar embossed . The swirling design was made using a fork and the occasional use of a brush handle.There are other tools you can use to get all-sorts of effects.
On the Bull and Brush glass the letters were deep blasted . They are blasted very deep, nearly through to the other side. Try and avoid going this deep you can get the same effect at a more shallow depth of blasting plus it's some times harder to gild into the deeper sections of the blasting. I then applied 3 coats of 1 shot's Sign Restoring clear ,let it all dry then water gilded the letters in 23crt gold. Finally I finished with one more coat of varnish to stop any bleed through of the final coat of metallic 1 shot gold.
I like to use the Sign restoring clear because when I come to scraping the varnish off it removes easily without chipping into the gilded areas of the letters. Some of the other varnishes tend to be more brittle when it comes to scraping plus it leaves a more richer gold to the letters because of it's slightly yellow colour . There are other ways but this way works well for me. Hope this helps you Felix
John Studden is your man for screened letter centres ,he as some nice little tips on this technique.
Dave
-
- Posts: 57
- Joined: Mon Apr 25, 2005 10:36 am
- Location: Luquillo, Puerto Rico
- Contact:
-
- Posts: 1077
- Joined: Fri Apr 09, 2004 9:29 am
- Location: Ottawa Canada
- Contact:
Hi Felix .... am honoured you requested info on a couple of pieces of mine. What you are seeing is "tinsel" Saw this at Glawson and Evans the first time out there and I also was fascinated by it. In the "spring Tonic" cover I did for David and Doc there was a glaze of ruby schellac first.....pearl and a sprinkling of tinsel. Silver behind the pearl, gold in the panels. The Black Thorn Cafe piece was done with frog juice as a binder and this is the process I have used ever since. Rick also used this as the "varnish" as it dosen't yellow so radically. The Conclave 13th was done with varnish as well as the Spring Tonic and both look much darker than when first done. It goes without saying that the bottoms of both (best I recall) were damar and water gilded.
-
- Posts: 57
- Joined: Mon Apr 25, 2005 10:36 am
- Location: Luquillo, Puerto Rico
- Contact: