Welcome to The Hand Lettering Forum!
This is an interactive Bulletin Board on the topics of Sign making, design, fabrication, History, old Books and of coarse Letterheads, Keepers of the craft. The Hand Lettering Forum features links to resources, sign art history, techniques, and artists profiles. Learn more about Letterheads at https://theletterheads.com. Below you'll see Mchat has been added as a live communication portal for trial, and the Main forum Links are listed below.

LED glass lighting

Hand Lettering topics: Sign Making, Design, Fabrication, Letterheads, Sign Books.

Moderators: Ron Percell, Mike Jackson, Danny Baronian

Post Reply
Jerry Berg
Posts: 369
Joined: Wed May 02, 2007 3:17 pm
Location: pacific northwest

LED glass lighting

Post by Jerry Berg »

I'm looking for an on-line source for LED lighting for use with sand carved glass.
This would be used on a single end to illuminate the carving.

Thanks much in advance, Jerry
Roderick Treece
Posts: 1086
Joined: Sat Apr 10, 2004 8:04 pm
Location: San deigo Calif
Contact:

Post by Roderick Treece »

Jerry,
Try these guys.
http://www.on-sitesystems.com/

Feybra feybrah@on-sitesystems.com 1 800 838 7778

Really nice to deal with and they get my quotes back right away.There are two kinds LED light tracks.One color (White) and RGB witch can be mixed to make colors and also change color.

They also sell a small unit for doing a sample piece.I thinks it's 12" for 45.00

Roderick
Jerry Berg
Posts: 369
Joined: Wed May 02, 2007 3:17 pm
Location: pacific northwest

Post by Jerry Berg »

Thanks Roderik,
That sure was fast! Much appreciated.
vance galliher
Posts: 321
Joined: Mon Apr 12, 2004 11:38 pm
Location: springfield, or.
Contact:

Post by vance galliher »

Jerry..........for my LED carved panels, I use XYZ Systems in Canada. If you want more info give me a call. I would also suggest using Starphire glass (low lead low iron content=no greenish tint to carvings.........really nice )
Post Reply