Welcome to The Hand Lettering Forum!
This is an interactive Bulletin Board on the topics of Sign making, design, fabrication, History, old Books and of coarse Letterheads, Keepers of the craft. The Hand Lettering Forum features links to resources, sign art history, techniques, and artists profiles. Learn more about Letterheads at https://theletterheads.com. Below you'll see Mchat has been added as a live communication portal for trial, and the Main forum Links are listed below.
This is an interactive Bulletin Board on the topics of Sign making, design, fabrication, History, old Books and of coarse Letterheads, Keepers of the craft. The Hand Lettering Forum features links to resources, sign art history, techniques, and artists profiles. Learn more about Letterheads at https://theletterheads.com. Below you'll see Mchat has been added as a live communication portal for trial, and the Main forum Links are listed below.
Why is the gold on my patent leaf comming off the paper?
Moderators: Ron Percell, Mike Jackson, Danny Baronian
-
- Posts: 338
- Joined: Sun Apr 11, 2004 6:15 pm
- Location: east canaan ct
- Contact:
Why is the gold on my patent leaf comming off the paper?
I switched to patent to save a litle gold and when it works, it works great. My last pack and this one has the leaf comming off the paper when I apply it. Any ideas? Can I fix it? I have tried putting a book under about a 25 lb weight in the hopes of "pressing" more firmly onto the paper.....no luck!
All ideas welcome.
Thanks in advance!
Joe
All ideas welcome.
Thanks in advance!
Joe
Makin Chip$ and Havin Fun!
-
- Site Admin
- Posts: 638
- Joined: Wed Apr 07, 2004 2:16 am
- Contact:
Hi Joe,
my guess would be there is not enough powder to retain the leaves on the transfer paper, and there's nothing that will change that. First thing I'd do is have the supplier replace your recent purchase.
Assuming this is a new purchase, this should'nt occur unless it's very old stock.
Hopefully someone else will offer other suggestions, in the meantime if you want to apply as patent leaf, cut squares of wax paper slightly larger than the leaf, place the wax paper over loose leaf gold and transfer to the wax paper and apply as patent. If your patent is coming off easily try the wax paper, and see if it will transfer easily.
Danny
my guess would be there is not enough powder to retain the leaves on the transfer paper, and there's nothing that will change that. First thing I'd do is have the supplier replace your recent purchase.
Assuming this is a new purchase, this should'nt occur unless it's very old stock.
Hopefully someone else will offer other suggestions, in the meantime if you want to apply as patent leaf, cut squares of wax paper slightly larger than the leaf, place the wax paper over loose leaf gold and transfer to the wax paper and apply as patent. If your patent is coming off easily try the wax paper, and see if it will transfer easily.
Danny
-
- Posts: 338
- Joined: Sun Apr 11, 2004 6:15 pm
- Location: east canaan ct
- Contact:
-
- Posts: 1077
- Joined: Fri Apr 09, 2004 9:29 am
- Location: Ottawa Canada
- Contact:
-
- Posts: 338
- Joined: Sun Apr 11, 2004 6:15 pm
- Location: east canaan ct
- Contact:
-
- Posts: 118
- Joined: Mon Aug 02, 2004 11:59 am
-
- Posts: 1077
- Joined: Fri Apr 09, 2004 9:29 am
- Location: Ottawa Canada
- Contact:
Joe......I've been using the german leaf Schwabacher (sp?) and it's pretty good. I also had some "Best" which is an Italian leaf that was almost impossible to get off the page AND in desperation last summer ended up with another pack that was terrific. I still seem to stick to the German as it has been consistent.
-
- Posts: 338
- Joined: Sun Apr 11, 2004 6:15 pm
- Location: east canaan ct
- Contact:
-
- Posts: 1077
- Joined: Fri Apr 09, 2004 9:29 am
- Location: Ottawa Canada
- Contact:
-
- Posts: 338
- Joined: Sun Apr 11, 2004 6:15 pm
- Location: east canaan ct
- Contact:
-
- Posts: 569
- Joined: Fri Dec 31, 2004 6:41 pm
- Location: Estes Park, CO
- Contact:
Patent
Very interesting as I have been finding that the WB has the least problems and I have some Sepp and Monarch which seem to be ok but with some failures too. I just acquired a pack of 1954 vintage Hastings which is wonderful but not much help to you. As near as I can tell, the issue has to do with the texture of the paper itself as well as the pressure applied in the manufacutre process. It seems to be a hit and miss issue with the quality of paper varying wildly, more than the pressure application itself. Overall, i have always preferred loose leaf anyway for appearance and only use the patent in extreme circumstances, of which there have been quite a few lately. So after that rambling, my advice is to use loose leaf unleass you have no other option.
-
- Posts: 1077
- Joined: Fri Apr 09, 2004 9:29 am
- Location: Ottawa Canada
- Contact:
Kent. Am not sure I understand appearance factor as I've never been able to tell the difference when on the surface. Have tried them side by side as I'd also heard there was an improved appearance with loose. I'd come to the conclusion that there might be more rouge on some pages/manufacturers etc. Like I said....am sure it's a plot.
-
- Posts: 338
- Joined: Sun Apr 11, 2004 6:15 pm
- Location: east canaan ct
- Contact:
-
- Posts: 569
- Joined: Fri Dec 31, 2004 6:41 pm
- Location: Estes Park, CO
- Contact:
Depending upon the manufacturer and other similar factors, I have found that the pattern of the paper is pressed into the leaf. Some alloys of the gold will keep that pattern which cannot be rubbed out but can be hidden with burnishing. I discussed this with Matthew Swift many years ago and he felt that the pressure used in attaching the leaf to the paper was a key not only to how well it sticks to the paper but also how deeply the pattern is pressed into the leaf. If you can see the pattern of the paper on the gold before applying, then the pattern goes all the way through the leaf which will give it a more matted appearance. Both loose and patent are technically XX thick which is roughly .0000035 inches. Because the better leaf is hand finished, that thickness is not exact and some gold beaters indicate that the pressure used in attaching the leaf to the patent paper will make it also thinner but that has not been confirmed. The other part of the issue is more evident when using patent on glass. There is often talc on patent more than rouge from the books, which can be trapped in the size on glass which you will see through the glass. The talc is used in the process of attaching the leaf to the application paper. Unlike loose leaf glass gold which is specially selected, patent tends to have a few holidays similar to surface leaf which can cause gold bloom and therefore a duller finish.
Bottom line is that personal preferance will win out and step testing with your favorites will tell each of us which we prefer to use.
Bottom line is that personal preferance will win out and step testing with your favorites will tell each of us which we prefer to use.