Lettering on cloth

An interactive section of TheLetterheads.com

Topics include: Sign Making, Design, Fabrication, Letterheads, Sign Books.

Off Topic Posts may be deleted at the discretion of the web hosts. ABSOLUTELY NO SHARING OF COPYRIGHTED FONTS, CLIP ART, or VIDEOS!

Please take social chit-chat elsewhere!

Moderators: Danny Baronian, Mike Jackson

Post Reply
David Slade
Posts: 104
Joined: Sat May 23, 2009 7:01 am
Location: Osaka, Japan
Contact:

Lettering on cloth

Post by David Slade » Wed Nov 25, 2015 2:58 am

I tried to letter a T-shirt with One Shot today. At first the paint was to thick and kind of skimmed over the surface. Thinning seemed to work at first. I went over the top of the "B" several times and it seemed ok. But soon the paint started bleeding. The shirt was 100% cotton but not new. Is there a coating or something that can be used?
Thanks!
Attachments
image.jpeg
image.jpeg (133.08 KiB) Viewed 1799 times

Anthony Bennett
Posts: 309
Joined: Tue May 11, 2010 4:50 am
Location: England
Contact:

Re: Lettering on cloth

Post by Anthony Bennett » Thu Nov 26, 2015 3:23 am

You need to seal with a clear coat, over in the UK they use GAC 500 and then again with the same stuff to finish, I don't know if you get it in the US of A.
It's use is to seal the material and prevent bleed as the clear coat will already have done it. You might also consider using it when using colours primary colours to stop the edges becoming secondary colour or giving the appearance of changing.

I have never heard of one - being used on a T-shirt, you must have thinned it down somewhat as, once dried straight 1-shot would become like a thick plastisol.

Good Luck with it.

Lee Littlewood
Posts: 219
Joined: Thu Apr 15, 2004 2:36 pm
Location: Portland, Oregon
Contact:

Re: Lettering on cloth

Post by Lee Littlewood » Sat Dec 26, 2015 11:29 pm

You might try getting the tee shirt damp with water before lettering with 1Shot. The 1Shot should be thinned a bit. I like white gasoline aka camping stove fuel - it seems to make the paint watery but not runny, sort of. The theory is that the water will fill the 'pores' and the oilbase paint won't be sucked out from the strokes so much. It actually works on big raw canvas banners, but I don't know about small letters.
Best bet is to use acrylic paints and a synthetic brush, and stretch the shirt tight. And expect to double-coat no matter what.
where am i? Now, when i need me...

Joe Morreale
Posts: 21
Joined: Fri Oct 12, 2012 9:32 am

Re: Lettering on cloth

Post by Joe Morreale » Wed Dec 30, 2015 11:07 am

It's tedious but whenever I have to letter on cloth i use a coat, sometimes two of blockout as prime. I'm pretty sure you can use poster color as well. It dries faster and doesn't want to bleed. After your n first coat the other go easy. The cloth will be stiff when you are done. I've used this procedure on hundreds of cloth awnings.

pat mackle
Posts: 156
Joined: Sun Feb 05, 2012 5:35 pm

Re: Lettering on cloth

Post by pat mackle » Thu Dec 31, 2015 12:21 pm

A friend of mine puts art and letters on his T shirts by applying computer cut or hand cut stencils(for that freehand look) onto the shirt, and then lightly spraying them in multiple stages with spray can paints. They are very crisp and the spray paint stays solid after many washes. Great for small runs.

Kent Smith
Posts: 559
Joined: Fri Dec 31, 2004 6:41 pm
Location: Estes Park, CO
Contact:

Re: Lettering on cloth

Post by Kent Smith » Sun Jan 03, 2016 1:09 pm

A few thinned coats of ti-cote will seal the fabric, applied with an airbrush is best. Of course airbrushing the lettering is a good option too.

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 3 guests