Welcome to The Hand Lettering Forum!
This is an interactive Bulletin Board on the topics of Sign making, design, fabrication, History, old Books and of coarse Letterheads, Keepers of the craft. The Hand Lettering Forum features links to resources, sign art history, techniques, and artists profiles. Learn more about Letterheads at https://theletterheads.com. Below you'll see Mchat has been added as a live communication portal for trial, and the Main forum Links are listed below.

Tiki bar sign

Hand Lettering topics: Sign Making, Design, Fabrication, Letterheads, Sign Books.

Moderators: Ron Percell, Mike Jackson, Danny Baronian

Post Reply
Paige Howarth
Posts: 7
Joined: Wed Mar 16, 2016 8:43 am

Tiki bar sign

Post by Paige Howarth »

Hi all! I just wanted to share a glass project I recently finished. Half my basement is a print shop and the other half is a tiki bar (yes, I spend a lot of time in the basement.) I decided to try my hand at a large glass piece for behind the bar.

It is clearly a total amateur job :lol: , but I'm proud of the end result, and looking forward to future projects. I can't thank the contributors here enough for the vast amount of knowledge shared on this forum!

Sorry for the lousy pics; the lighting is (mercifully) low in the bar. The water and word "Pineapple" are glue chipped. There are areas of solution silver, water gilding, and a screened pattern border, but most of it was reverse painted oils backed with aluminum leaf.

Thanks for looking, and feel free to drop by for a mai tai if you're passing through Connecticut. :D
PL1.jpg
PL1.jpg (268.18 KiB) Viewed 5119 times
pl2.jpg
pl2.jpg (240.77 KiB) Viewed 5117 times
pl3.jpg
pl3.jpg (250.76 KiB) Viewed 5116 times
Dan Seese
Posts: 324
Joined: Tue Apr 13, 2004 11:29 pm
Location: Fort Collins, CO
Contact:

Re: Tiki bar sign

Post by Dan Seese »

It doesn't look like an amateur job to me, Paige. Nicely done!
Thank you for sharing it.
Dan
"The lyf so short, the craft so long to lerne."
Geoffrey Chaucer (c. 1340 - 1400)

http://DanSeeseStudios.com
http://www.DanSeeseStudios.com/blog/
http://www.facebook.com/DanSeeseStudios
Paige Howarth
Posts: 7
Joined: Wed Mar 16, 2016 8:43 am

Re: Tiki bar sign

Post by Paige Howarth »

Dan, thanks for the kind words. Your work continues to be a great inspiration to folks like me.

Looking forward to working on more glass projects as the looming New England Winter forces me to tinker indoors.

Paige
Lee Littlewood
Posts: 228
Joined: Thu Apr 15, 2004 2:36 pm
Location: Portland, Oregon
Contact:

Re: Tiki bar sign

Post by Lee Littlewood »

Pretty hot stuff there. The border looks quite interesting - any good pix of it?

If you silkscreen in your basement, how do you exhaust the fumes? Enquiring minds want to know...
where am i? Now, when i need me...
Paige Howarth
Posts: 7
Joined: Wed Mar 16, 2016 8:43 am

Re: Tiki bar sign

Post by Paige Howarth »

Thanks lots Lee. Attached are a couple border and screen pics. I'd sandblasted it, but after back-painting the etching ended up being really subtle. I also gilded a 1/2" border up to the etched edge - a paper cutter worked out well for making thin strips.

The printed border is a fijian tapa pattern I had vectorized for an earlier project. When printing oil- or rubber-base inks downstairs I run two squirrel-cage blowers that vent outside. This setup works well for cigar & pipe smoke too. :D Honestly, most of my volume screenprinting is on paper with water-based inks.

I mixed a real frankenstein ink: slow size and white oil paint with a few drops each of japan dryer and penetrol. This seemed to adhere and yielded the transparency I wanted, with the viscosity of letterpress ink: thick and sticky as honey and stringy as bubblegum. And it wasn't about to dry in the screen. I did have to do some touch-ups.

Happy Thanksgiving!
Paige
screen-border.jpg
screen-border.jpg (253.47 KiB) Viewed 4875 times
Post Reply