Glass Thickness

An interactive section of TheLetterheads.com

Topics include: Sign Making, Design, Fabrication, Letterheads, Sign Books.

Off Topic Posts may be deleted at the discretion of the web hosts. ABSOLUTELY NO SHARING OF COPYRIGHTED FONTS, CLIP ART, or VIDEOS!

Please take social chit-chat elsewhere!

Moderators: Danny Baronian, Mike Jackson

Post Reply
Aaron Aziz
Posts: 36
Joined: Sun Mar 25, 2012 2:08 am
Location: North Dakota (eastern)

Glass Thickness

Post by Aaron Aziz » Fri Jun 01, 2012 12:00 am

Hey I was just wonder how thick of glass should be used for goldleafing, glue chipping and just basic framed glass, wall signs?

Larry White
Posts: 1140
Joined: Thu Apr 08, 2004 4:18 am

Re: Glass Thickness

Post by Larry White » Fri Jun 01, 2012 9:43 am

I typically do most my stuff on 1/4" plate glass.
Every now and then I get a rejected piece of "sign size" tempered glass,
sometimes 3/8" thick, sometimes 1/2", but they get rather heavy.
Smaller things you could use 3/16" thick glass, but 1/4" is pretty much
the standard. I see no reason to do anything on 1/8" glass.
For a higher end result, I'll use an extra-clear Starphire glass,
but its cost is about double over standard plate glass.
Larry White
That's enough for now... it's gettin' late
Town Of Machine
http://www.walljewelry.com

Dan Seese
Posts: 313
Joined: Tue Apr 13, 2004 11:29 pm
Location: Fort Collins, CO
Contact:

Re: Glass Thickness

Post by Dan Seese » Fri Jun 01, 2012 3:27 pm

Aaron,

You can rely on what Larry says (aka Wm. Blake). He's worked one or two framed glass wall signs.

I remember having a similar question years ago. In some ways, it can be determined by the size of the final piece since since the larger you go, the thicker the glass. But 1/4" is a great all-around thickness on which you can do both large and small pieces.

I've used 1/8" for a sample kit I carry with me, simply because of the lighter weight - but even at that, I think the thicker glass looks nicer - especially if you are going to do any depth carving.

Dan

http://www.danseesestudios.com
Dan
"The lyf so short, the craft so long to lerne."
Geoffrey Chaucer (c. 1340 - 1400)

http://DanSeeseStudios.com
http://www.DanSeeseStudios.com/blog/
http://www.facebook.com/DanSeeseStudios

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 6 guests