Replicating a broken white acid etched window

An interactive section of TheLetterheads.com

Topics include: Sign Making, Design, Fabrication, Letterheads, Sign Books.

Off Topic Posts may be deleted at the discretion of the web hosts. ABSOLUTELY NO SHARING OF COPYRIGHTED FONTS, CLIP ART, or VIDEOS!

Please take social chit-chat elsewhere!

Moderators: Danny Baronian, Mike Jackson

Post Reply
erik winkler
Posts: 1063
Joined: Sat Feb 23, 2008 5:48 pm
Location: Amsterdam Netherlands
Contact:

Replicating a broken white acid etched window

Post by erik winkler » Sun Dec 23, 2012 4:57 am

Last week a client contacted me that her original pre second world war white etched panel was broken.
After calling different glass installers in her region she heard that it was and could not be done anymore.
After searching the web she found me and asked if I could replicate her family house treasure.
Yes I could and here are a few pictures of the process.
glass-fragments-send-to-me-by-the-customer.jpg
glass-fragments-send-to-me-by-the-customer.jpg (161.46 KiB) Viewed 5906 times
puzzle-ready-no-tracing-the-design.jpg
puzzle-ready-no-tracing-the-design.jpg (135.61 KiB) Viewed 5901 times
preparing-the-acid-mixture.jpg
preparing-the-acid-mixture.jpg (125.21 KiB) Viewed 5902 times
removing-white-acid-mixture.jpg
removing-white-acid-mixture.jpg (119.03 KiB) Viewed 5910 times
result-of-the-three-toned-white-acid-etched-glass-panel.jpg
result-of-the-three-toned-white-acid-etched-glass-panel.jpg (113.86 KiB) Viewed 5905 times
If you want to see more pictures and read the discription here is the news bulletin on my website here
Realizing we are in the 2nd renaissance of the arts.
Learn, copy and trying to improve...
Still in the learning phase ;-)
Amsterdam Netherlands
www.ferrywinkler.nl
www.schitterend.eu
www.facebook.com/Schitterend.eu

pat mackle
Posts: 156
Joined: Sun Feb 05, 2012 5:35 pm

Re: Replicating a broken white acid etched window

Post by pat mackle » Mon Dec 24, 2012 12:44 pm

Ha, the client even included some Maple leafs along with the broken glass. Looks like a good replication of the original.
How many tones were involved?
Did you use vinyl resist, or screen print?
Pat

Jerry Berg
Posts: 343
Joined: Wed May 02, 2007 3:17 pm
Location: pacific northwest

Re: Replicating a broken white acid etched window

Post by Jerry Berg » Mon Dec 24, 2012 2:10 pm

Looks like you did a very nice replication for your client Erik. Good job!

Robare M. Novou
Posts: 415
Joined: Thu May 06, 2004 11:18 am
Location: Milwaukee
Contact:

Re: Replicating a broken white acid etched window

Post by Robare M. Novou » Mon Dec 24, 2012 3:07 pm

Nice Work Erik.
What's On Your Book Shelf ?

http://www.milwaukeesignworks.com

erik winkler
Posts: 1063
Joined: Sat Feb 23, 2008 5:48 pm
Location: Amsterdam Netherlands
Contact:

Re: Replicating a broken white acid etched window

Post by erik winkler » Tue Dec 25, 2012 7:23 am

It was only a three toned piece and the design was not that intricate so I chose vinyl as the easiest way to use as the resist.
Key factor was being carefull withe the first white etching resist so i would not have to place it exact on the same place when cutting it down for the third tone.
Realizing we are in the 2nd renaissance of the arts.
Learn, copy and trying to improve...
Still in the learning phase ;-)
Amsterdam Netherlands
www.ferrywinkler.nl
www.schitterend.eu
www.facebook.com/Schitterend.eu

Danny Baronian
Site Admin
Posts: 623
Joined: Wed Apr 07, 2004 2:16 am
Contact:

Re: Replicating a broken white acid etched window

Post by Danny Baronian » Tue Dec 25, 2012 12:36 pm

So, a little play and a little work? A jig saw puzzle and some glass work, and you got paid for both?

Looks like your work clothes for this job prevented any side trips. :)

Where did you get the sink the acid work was done in, looks like a nice one?

Nice job!

Danny
Danny Baronian
Baronian Mfg.
CNC Routing & Fabrication
http://www.baronian.com

erik winkler
Posts: 1063
Joined: Sat Feb 23, 2008 5:48 pm
Location: Amsterdam Netherlands
Contact:

Re: Replicating a broken white acid etched window

Post by erik winkler » Tue Dec 25, 2012 1:01 pm

My little niece should have helped me with the puzzle.
it took rediculous long to do the puzzle: three hours, who will ever pay those hours.
I had the tray custom made for me Danny, it was about 300 dollars.
I do my silvering and etching in it.
Merry Christmas!
Realizing we are in the 2nd renaissance of the arts.
Learn, copy and trying to improve...
Still in the learning phase ;-)
Amsterdam Netherlands
www.ferrywinkler.nl
www.schitterend.eu
www.facebook.com/Schitterend.eu

Danny Baronian
Site Admin
Posts: 623
Joined: Wed Apr 07, 2004 2:16 am
Contact:

Re: Replicating a broken white acid etched window

Post by Danny Baronian » Tue Dec 25, 2012 3:26 pm

Ha! You knew better then Erik!

If your niece had done it, and you paid her a little, you'd not only have saved money (time), but made one niece happy to help, and earn some!

Trays looks well made, $ 300 is a bargain. Looks like a nice job.

Merry Christmas to you too!

Danny
Danny Baronian
Baronian Mfg.
CNC Routing & Fabrication
http://www.baronian.com

Bill Masters
Posts: 45
Joined: Sun Apr 11, 2004 11:17 am
Location: Scranton, Pa.

Re: Replicating a broken white acid etched window

Post by Bill Masters » Wed Dec 26, 2012 1:28 am

Nice job Eric.
thanks for sharing, where can we buy plans for that sink,
I like howthe drain spout is built in.

Anthony Bennett
Posts: 319
Joined: Tue May 11, 2010 4:50 am
Location: England
Contact:

Re: Replicating a broken white acid etched window

Post by Anthony Bennett » Wed Dec 26, 2012 5:42 am

Thanks for sharing this lovely job erik.

erik winkler
Posts: 1063
Joined: Sat Feb 23, 2008 5:48 pm
Location: Amsterdam Netherlands
Contact:

Re: Replicating a broken white acid etched window

Post by erik winkler » Wed Dec 26, 2012 6:18 am

If anyone wants to build a tray like this, draw the plans up yourself and bring it to a plastics company.
Think about the maximum glass size you want to work with, take about 3 inches of extra space all around.
The inner height should be about 7 inches.

I thought about how to lift the tray for easy pooring out the acid and other liquids, without touching the dangerous chemicals.
I came up with a lifting border underneath the edges on all four sides (see photo).
This will mean that the bottom is flooting above the table for two inches.
If you will choose for the same setup remember to place studs of two inches underneath the bottom so that it will remain flat instead of hanging down due to its own weight: allways have a perfect horizontal level when silvering or acid etching.

The sprout is cool, but mine is a bit to thin, If I could redo it, I would have chosen a bigger one, so I could empty the tray much quicker.
The sprout costed a lot, but it could be done with a big piece of cork and a whole in the bottom or on the lowest place on the side, but just be sure it is safe and will not spil a drop of dangerous acid! The acid is lethal/deadly.
Realizing we are in the 2nd renaissance of the arts.
Learn, copy and trying to improve...
Still in the learning phase ;-)
Amsterdam Netherlands
www.ferrywinkler.nl
www.schitterend.eu
www.facebook.com/Schitterend.eu

Kent Smith
Posts: 555
Joined: Fri Dec 31, 2004 6:41 pm
Location: Estes Park, CO
Contact:

Re: Replicating a broken white acid etched window

Post by Kent Smith » Mon Dec 31, 2012 11:36 am

Nice replication. I always chuckle at the puzzles we get like this. Al least it is more of a challenge than an "out of the box" picture puzzle and more of a satisfaction when completed. Cannot tell you how many times I have received a box full of even smaller pieces and not even a photo to go by. I guess that is why I have grandkids to work on such a puzzle. I really like your tub especially with the drain.

Great job on both.

DAVE SMITH
Posts: 1132
Joined: Sat Jul 10, 2004 11:12 am
Location: ENGLAND

Re: Replicating a broken white acid etched window

Post by DAVE SMITH » Sun Jan 06, 2013 5:41 am

This is nicely made Erik. great job there mate. I see the polypropoleen trays came out good, I should of put some handles in mine.

very well done

Dave

Ingrid Mager
Posts: 75
Joined: Mon Jan 18, 2010 12:23 am

Re: Replicating a broken white acid etched window

Post by Ingrid Mager » Thu Feb 07, 2013 10:09 pm

Polypropylene and not polyethylene for the tank???
It was recommended to me by one HFA worker to use Polyethylene. . . which one should it be or does it make much difference?

One online source says:
"• Polypropylene is not as sturdy as polyethylene.
Polypropylene is stiffer and resistant to chemicals and organic solvents compared to polyethylene."

Thanks,
Inga
Last edited by Ingrid Mager on Fri Feb 08, 2013 11:22 am, edited 2 times in total.

Mirella Nuzzolese
Posts: 6
Joined: Tue May 02, 2006 11:26 pm
Location: Brussels

Re: Replicating a broken white acid etched window

Post by Mirella Nuzzolese » Thu Feb 07, 2013 11:03 pm

Thanks for sharing this
“Architecture is the alpha principle of all arts.”

Ingrid Mager
Posts: 75
Joined: Mon Jan 18, 2010 12:23 am

Re: Replicating a broken white acid etched window

Post by Ingrid Mager » Sat Feb 09, 2013 10:56 am

1) Can you tell us any more about the dividing piece you have in your tank that is standing vertically?

2) Maybe it is overkill, but I think a table where you could crank the height up from one side for draining might work well too. (I like your drain plug instead of a cork.)
Thanks,
Inga

Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests