Welcome to The Hand Lettering Forum!
This is an interactive Bulletin Board on the topics of Sign making, design, fabrication, History, old Books and of coarse Letterheads, Keepers of the craft. The Hand Lettering Forum features links to resources, sign art history, techniques, and artists profiles. Learn more about Letterheads at https://theletterheads.com. Below you'll see Mchat has been added as a live communication portal for trial, and the Main forum Links are listed below.
This is an interactive Bulletin Board on the topics of Sign making, design, fabrication, History, old Books and of coarse Letterheads, Keepers of the craft. The Hand Lettering Forum features links to resources, sign art history, techniques, and artists profiles. Learn more about Letterheads at https://theletterheads.com. Below you'll see Mchat has been added as a live communication portal for trial, and the Main forum Links are listed below.
Appropriate thinner/solvent
Moderators: Ron Percell, Mike Jackson, Danny Baronian
-
- Posts: 123
- Joined: Wed Feb 07, 2007 12:38 pm
- Location: Nebraska
Appropriate thinner/solvent
Need advice: Has anyone had success using alternative solvents and thinners for one-shot and Gilder's Black enamel other than thinner traditional paint thinner and turps? "Safer" materials are quire ineffective. An approved respirator is in use. Any advice? Thank you.
Re: Appropriate thinner/solvent
Just curious: Do you normally use a respirator when using 1Shot and Gilder's Black? Are you hand lettering, rolling or spraying?
I sometimes use "Edge", which was originally a Chromatic product taken over by 1Shot when they bought Chromatic. It maintains the body of the paint pretty well without just thinning the integrity of the paint like paint thinner tends to do. It also slides pretty nicely when hand lettering. Even though I haven't really done any airbrushing for a long time, I also liked to use it when airbrushing or spraying 1Shot.
I guess I should have asked at the outset: What are you trying to accomplish with an alternate thinner and why do you want something different than paint thinner or turps? Have you asked Ron Percell at Letterhead Sign Supply about alternative solvents for their Gilder's Black?
I sometimes use "Edge", which was originally a Chromatic product taken over by 1Shot when they bought Chromatic. It maintains the body of the paint pretty well without just thinning the integrity of the paint like paint thinner tends to do. It also slides pretty nicely when hand lettering. Even though I haven't really done any airbrushing for a long time, I also liked to use it when airbrushing or spraying 1Shot.
I guess I should have asked at the outset: What are you trying to accomplish with an alternate thinner and why do you want something different than paint thinner or turps? Have you asked Ron Percell at Letterhead Sign Supply about alternative solvents for their Gilder's Black?
- Attachments
-
- edge.jpg (165.75 KiB) Viewed 6426 times
Dan
"The lyf so short, the craft so long to lerne."
Geoffrey Chaucer (c. 1340 - 1400)
http://DanSeeseStudios.com
http://www.DanSeeseStudios.com/blog/
http://www.facebook.com/DanSeeseStudios
"The lyf so short, the craft so long to lerne."
Geoffrey Chaucer (c. 1340 - 1400)
http://DanSeeseStudios.com
http://www.DanSeeseStudios.com/blog/
http://www.facebook.com/DanSeeseStudios
-
- Posts: 123
- Joined: Wed Feb 07, 2007 12:38 pm
- Location: Nebraska
Re: Appropriate thinner/solvent
Sorry that I didn't elaborate. It's a health issue and I wish to minimize exposure. Also, I hoped to have little or no effect on adhesion to the glass. I have tried low odor oil thinners which are "very low odor" and work well with one-shot without affecting adhesion. They are, of course, petroleum based and are flammable. I think that with care I can minimize ill effects while enjoying the glass work. Incidentally, I enjoy and admire your fine work. Thank you. Bob
Re: Appropriate thinner/solvent
Thanks for the compliment, Bob. There are so many very talented artisans who contribute to this forum, aren't there?
Knowing that your health is a factor in the solvent you're looking for is helpful. Frankly, I find the odor associated with Edge to be fairly benign and somewhat pleasant, but that's certainly no guarantee that it's not detrimental to your health. Best of luck in finding a suitable solution.
Knowing that your health is a factor in the solvent you're looking for is helpful. Frankly, I find the odor associated with Edge to be fairly benign and somewhat pleasant, but that's certainly no guarantee that it's not detrimental to your health. Best of luck in finding a suitable solution.
Dan
"The lyf so short, the craft so long to lerne."
Geoffrey Chaucer (c. 1340 - 1400)
http://DanSeeseStudios.com
http://www.DanSeeseStudios.com/blog/
http://www.facebook.com/DanSeeseStudios
"The lyf so short, the craft so long to lerne."
Geoffrey Chaucer (c. 1340 - 1400)
http://DanSeeseStudios.com
http://www.DanSeeseStudios.com/blog/
http://www.facebook.com/DanSeeseStudios
-
- Posts: 61
- Joined: Sat Jun 29, 2013 1:06 pm
Re: Appropriate thinner/solvent
I use VMP Naptha or Naptha - this was recommended to me by Ron Percell at Letterhead Sign Supply and it has yet to fail. It's also the main component in the one shot based thinners. Doesn't seem too toxic but then again exposure to chemicals isn't too bad in the industry. Minimal at worst.
-
- Posts: 1077
- Joined: Fri Apr 09, 2004 9:29 am
- Location: Ottawa Canada
- Contact:
Re: Appropriate thinner/solvent
Just and addition to all these replies....While I was at the Rochester Meet in the UK a couple of years ago there was a discussion about the various reducers and I've since switched to the various 1-shot supplied/recommended varieties. The premise of the discussion was the integrity of the paint film and until then I'd been like almost everyone else and was just using paint thinner.