That was the answer i looking for.
I should have been more specific.
Since i have only done Glue Chipping,
do you have to sandblast the Glass before
applying the Acid ?

ANOTHER PICTURE

I FOUND THIS TODAY.
ANY IDEA WHAT YEAR
THIS MEET WAS ?

kb

https://www.youtube.com/watch?v=sA1K1Q2 ... sSign%26Co.

Does anyone recognize this ?
Great Procedure and Quality Work

I would recommend a Gerber Sabre. All Routers Rout. My Experience has been understanding the Fine Details: Material, Speed, Thickness, Density, etc. We have broken many bits through the years. Carbide or Steel does make a difference in Routing, depending on the material kb P.S. Danny, Good Informati...

I would recommend a Gerber Sabre. All Routers Rout. My Experience has been understanding the Fine Details: Material, Speed, Thickness, Density, etc. We have broken many bits through the years. Carbide or Steel does make a difference in Routing, depending on the material kb P.S. Danny, Good Informati...

Has anyone heard of GOLDEN LEAF PRODUCTS ?
They sell an 8 Hour Slow Size. I am curious.

kb

I would like to say Thank You !
This Forum has solved many Questions &
brought New Questions. Sharing Techniques
and Ideas only creates a New Idea and
New or Old Methods..............

kb

https://archive.org/stream/silentsignwr ... 1/mode/2up

kb

Here is another 1.

https://archive.org/stream/silentsignwr ... 1/mode/2up

kb

http://www.cmog.org/sites/default/files ... BA34A7.pdf

kb

Hi Doug. These were done on our 408 Gerber Sabre Router. We Routed the Sign Panel, then inscribed the Outlines of the Lettering, which gives us the Layout of the Letters. The Borders were V Carved using the Router. We Routed the Letters separate. After painting and Gilding we Applied the letters to ...

Doug, this was Silver Leaf.
We used 2- 00 Capsules.
My Dad has had them for many years.
2 Drops of Detergent, since we Out-Lined First.

kb

Just finished this Monday.
HDU Signfoam, Convex Letters.

kb

Just finished 3 Windows for Shinola.

Kevin Betz

Hi Andrew.

Do you put any detergent in your Size ?
Also, what do you use for Gelatin,
Capsule's or Diamond's ?

Kevin

It looks like silicone, wax or water droplets were on the glass before the centers were done.

kb

I BELIEVE THIS IS IN DETROIT, MI. CIRCA 1920.
NOTICE THE WORKERS AT THE BOTTOM OF THIS PICTURE.
I WOULD GUESS THIS SIGN IS 40 FEET TALL OR MORE.

ALL I CAN SAY IS WOW. NICE WORK !

Would this include Glue Chipped Glass ?

kb

Pat, does this include the NEW 1SHOT from PPG ?
I have not tried it yet.
I am unsure about the difference between the 2,
the New Formula after Leaded 1 Shot and the other.
Yes, the Old 1 Shot we have acts the same as before.
This New paint baffles me. I still heat my Paint as before.

kb

Generally speaking, I try to never thin my Paint. I have found using Paint straight from the can the Best way; 1 Shot, Ronan, Chromatic, etc. In the Summer, it flows nice, warm temperatures. In the Winter I will Heat my Paint. What i mean is: I will always try to keep the paint at Room Temp. I will ...

I found this Photo of Rick in his shop.

Kevin

Nice piece Pat.
Thanks for showing it.
Any clue as to the year it was made ?

kb

Hi Pat.

Any chance you could post a picture of the Panel
you have from Rick ?

kevin

What is the advantage of mirroring the Glass?

I am wondering if you could tint a Varnish with a little Yellow, apply, and
allow it to dry then Water Guild with 10 k White Gold ?

kb

Can you post a Picture ?

Also, you said you rolled the Black on.
When rolling Paint, there is Always small
pockets that are not filled. That is where
Feathering the paint helps. Feathering
with a Brush helps to Eliminate pockets of Air.

kb

Hi Doug.

Can you tell me the name of the German Size ?
At this point, I am willing to try.

Kevin

Lee,

Thank You for your Information.
I will try a sample piece tomorrow with the Tan Label.

Kevin

Thank You Erik.

kevin