Welcome to The Hand Lettering Forum!
This is an interactive Bulletin Board on the topics of Sign making, design, fabrication, History, old Books and of coarse Letterheads, Keepers of the craft. The Hand Lettering Forum features links to resources, sign art history, techniques, and artists profiles. Learn more about Letterheads at https://theletterheads.com. Below you'll see Mchat has been added as a live communication portal for trial, and the Main forum Links are listed below.
This is an interactive Bulletin Board on the topics of Sign making, design, fabrication, History, old Books and of coarse Letterheads, Keepers of the craft. The Hand Lettering Forum features links to resources, sign art history, techniques, and artists profiles. Learn more about Letterheads at https://theletterheads.com. Below you'll see Mchat has been added as a live communication portal for trial, and the Main forum Links are listed below.
how would you remove a ghost......
Moderators: Ron Percell, Mike Jackson, Danny Baronian
-
- Posts: 321
- Joined: Mon Apr 12, 2004 11:38 pm
- Location: springfield, or.
- Contact:
how would you remove a ghost......
........imagine. Got a call from my friend Bill Blumberg today. He painted some nice graphics with One Shot on the interior of two large windows several years ago. Some time after that, the owner had the windows tinted on the inside because of too much sunlight (south side of bldg.) She recently moved to a new location, and at previous landlords request, had to remove the tint film and blade off the painted graphics. All seemed well until she went outside and saw a distinct imagine of the graphics (looks like etched) still on the glass. She called Bill for help after she and husband tried numerous products and solutions to no avail. If she can’t get it off, she’ll have to pay $2500 for replacement panels Would cerium oxide with buffing pad work ? . Any other suggestions?.
-
- Posts: 5
- Joined: Sun Oct 22, 2006 1:05 pm
- Location: Kalispell, Montana
- Contact:
Unfortunately only UV is going to equalize it, but in time it will fade away.
P
P
Family and carving........ Nothing beats 'em.
www.stmariegraphics.com
1911sr, k11, k31, zfk55, PE57 and Scheffield Chisels... The best of the best.
www.stmariegraphics.com
1911sr, k11, k31, zfk55, PE57 and Scheffield Chisels... The best of the best.
-
- Posts: 478
- Joined: Thu Apr 08, 2004 10:21 am
- Location: Monrovia, Ca.
- Contact:
Vance,
Having not seen this glass, several causes come to mind.
My guess on theirs is paint residue in the weathered surface.
Cerium would be far too fine and would not reach the paint until you polished the glass down to the paint.
I would suggest using a cleanser like Ajax or Comet and water.
Try a section using a white cotton tee shirt in a circular motion.
The pumice particles will roll around and act on each other as they work and grind the residue out of the glass.
I don't believe there is enough paint residue that you will see it appear on the cloth, but possibly. The real results will be seen either by viewing that section against what still exists, or by placing white paper from behind a looking close at the surface.
Instead of using water with the cleanser, you could also try a solvent. The solvent might wake up the paint enough for the pumice to act upon it.
If I think of anything more I'll add it later.
Pat
Having not seen this glass, several causes come to mind.
My guess on theirs is paint residue in the weathered surface.
Cerium would be far too fine and would not reach the paint until you polished the glass down to the paint.
I would suggest using a cleanser like Ajax or Comet and water.
Try a section using a white cotton tee shirt in a circular motion.
The pumice particles will roll around and act on each other as they work and grind the residue out of the glass.
I don't believe there is enough paint residue that you will see it appear on the cloth, but possibly. The real results will be seen either by viewing that section against what still exists, or by placing white paper from behind a looking close at the surface.
Instead of using water with the cleanser, you could also try a solvent. The solvent might wake up the paint enough for the pumice to act upon it.
If I think of anything more I'll add it later.
Pat
-
- Posts: 569
- Joined: Fri Dec 31, 2004 6:41 pm
- Location: Estes Park, CO
- Contact: