Welcome to The Hand Lettering Forum!
This is an interactive Bulletin Board on the topics of Sign making, design, fabrication, History, old Books and of coarse Letterheads, Keepers of the craft. The Hand Lettering Forum features links to resources, sign art history, techniques, and artists profiles. Learn more about Letterheads at https://theletterheads.com. Below you'll see Mchat has been added as a live communication portal for trial, and the Main forum Links are listed below.
This is an interactive Bulletin Board on the topics of Sign making, design, fabrication, History, old Books and of coarse Letterheads, Keepers of the craft. The Hand Lettering Forum features links to resources, sign art history, techniques, and artists profiles. Learn more about Letterheads at https://theletterheads.com. Below you'll see Mchat has been added as a live communication portal for trial, and the Main forum Links are listed below.
pvc to pvc......
Moderators: Ron Percell, Mike Jackson, Danny Baronian
-
vance galliher
- Posts: 321
- Joined: Mon Apr 12, 2004 11:38 pm
- Location: springfield, or.
- Contact:
pvc to pvc......
Why do I have to login each time? .........Now on to my inquiry. I don’t work much with pvc, but other than abrading and cleaning the surface, what adhesive would you use to bond two piece of pvc together.? As in letters to a contour panel with no standoff
-
Danny Baronian
- Site Admin
- Posts: 638
- Joined: Wed Apr 07, 2004 2:16 am
- Contact:
Re: pvc to pvc......
Vance,
log in: if you're on a pc, with the box checked that says 'log me in each time', it should allow automatic log in.
Gluing pvc needs no special treatment other than normal cleaning using a 50/50 mixture of water and alcohol, no abrading necessary. Use the same glue / solvent used to cement pvc pipe available at any hardware store.
Glue, clamp up, and parts are ready to be machined within 15 - 20 minutes.
log in: if you're on a pc, with the box checked that says 'log me in each time', it should allow automatic log in.
Gluing pvc needs no special treatment other than normal cleaning using a 50/50 mixture of water and alcohol, no abrading necessary. Use the same glue / solvent used to cement pvc pipe available at any hardware store.
Glue, clamp up, and parts are ready to be machined within 15 - 20 minutes.
-
Kent Smith
- Posts: 569
- Joined: Fri Dec 31, 2004 6:41 pm
- Location: Estes Park, CO
- Contact:
Re: pvc to pvc......
My security software cleans my registry and internet files weekly so I then have to login again on many sites. Not so much a bother to be protected.
I like the slow set PVC pipe adhesive when laminating so I can reposition and clamp to get a smooth seam.
I like the slow set PVC pipe adhesive when laminating so I can reposition and clamp to get a smooth seam.
Denver Chapter of the Letterheads