I make one of these every few years. Just doesn't seem to be a lot of call for them?
This is all HDU, about 4' long. Painted with latex and gold leafed. The ends are made in two layers.....each is 1" thick.
Each end takes about an hour and a half to carve.....doing the undercuts on the back and sanding takes another two hours.
I took quite a few photos for a step by step if anyone is interested.
Thanks,
Joe,
Makin Chip$ and Havin Fun!
Welcome to The Hand Lettering Forum!
This is an interactive Bulletin Board on the topics of Sign making, design, fabrication, History, old Books and of coarse Letterheads, Keepers of the craft. The Hand Lettering Forum features links to resources, sign art history, techniques, and artists profiles. Learn more about Letterheads at https://theletterheads.com. Below you'll see Mchat has been added as a live communication portal for trial, and the Main forum Links are listed below.
This is an interactive Bulletin Board on the topics of Sign making, design, fabrication, History, old Books and of coarse Letterheads, Keepers of the craft. The Hand Lettering Forum features links to resources, sign art history, techniques, and artists profiles. Learn more about Letterheads at https://theletterheads.com. Below you'll see Mchat has been added as a live communication portal for trial, and the Main forum Links are listed below.
Traditional, hand carved, ribbon sternboard with SxS
Moderators: Ron Percell, Mike Jackson, Danny Baronian
-
- Posts: 338
- Joined: Sun Apr 11, 2004 6:15 pm
- Location: east canaan ct
- Contact:
Traditional, hand carved, ribbon sternboard with SxS
Last edited by joe cieslowski on Thu Apr 07, 2011 4:28 pm, edited 1 time in total.
Makin Chip$ and Havin Fun!
-
- Site Admin
- Posts: 1705
- Joined: Tue Apr 06, 2004 11:02 pm
- Location: Jackson Hole, WY
- Contact:
Re: Traditional, hand carved, ribbon sternboard
Hi Joe,
Yes, Please post your step-by-steps on this project. Looks like you already posted a few of them.
Mike Jackson
Yes, Please post your step-by-steps on this project. Looks like you already posted a few of them.
Mike Jackson
Mike Jackson / co-administrator
Golden Era Studios
Vintage Ornamental Clip art
Jackson Hole, WY
Photography site:
Teton Images
Jackson Hole photography blog:
Best of the Tetons
Golden Era Studios
Vintage Ornamental Clip art
Jackson Hole, WY
Photography site:
Teton Images
Jackson Hole photography blog:
Best of the Tetons
-
- Posts: 41
- Joined: Mon Dec 06, 2010 9:01 pm
Re: Traditional, hand carved, ribbon sternboard
that looks awesome! id love to see more as well.
THE SKYS THE LIMIT
-
- Posts: 78
- Joined: Mon Jan 18, 2010 12:23 am
Re: Traditional, hand carved, ribbon sternboard
Simple......yet sooooo pretty. Must be in the crafstmanship.....in that last picture, one can see your sculpting is so smooth and right on, it literally looks like a thick ribbon bending and not something rigid.
~Inga
~Inga
-
- Posts: 5
- Joined: Sun May 31, 2009 6:35 pm
Re: Traditional, hand carved, ribbon sternboard
that is soooo cool! Love it!
Bernie
Bernie
-
- Posts: 338
- Joined: Sun Apr 11, 2004 6:15 pm
- Location: east canaan ct
- Contact:
Re: Traditional, hand carved, ribbon sternboard
Thanks every one!
I posted a step by step for this on another site.........
Here it is.. http://signs101.com/forums/showthread.php?t=77250
Why do it twice?
Glad you all liked it.
Joe
I posted a step by step for this on another site.........
Here it is.. http://signs101.com/forums/showthread.php?t=77250
Why do it twice?
Glad you all liked it.
Joe
Makin Chip$ and Havin Fun!
-
- Posts: 352
- Joined: Tue May 11, 2010 4:50 am
- Location: England
- Contact:
Re: Traditional, hand carved, ribbon sternboard
Thanks Joe, nice step by step.