I have an opportunity to bid on gilding some 24" tall engraved lettering on a fascia fascia.
I've never really actually worked with gilding precast material. Anyone have advice on a good sealer/primer to use or general technique on doing this?
Seems like it would be fairly simple but if anyone has done this it would help to get your take on it first.
Thanks!
Welcome to The Hand Lettering Forum!
This is an interactive Bulletin Board on the topics of Sign making, design, fabrication, History, old Books and of coarse Letterheads, Keepers of the craft. The Hand Lettering Forum features links to resources, sign art history, techniques, and artists profiles. Learn more about Letterheads at https://theletterheads.com. Below you'll see Mchat has been added as a live communication portal for trial, and the Main forum Links are listed below.
This is an interactive Bulletin Board on the topics of Sign making, design, fabrication, History, old Books and of coarse Letterheads, Keepers of the craft. The Hand Lettering Forum features links to resources, sign art history, techniques, and artists profiles. Learn more about Letterheads at https://theletterheads.com. Below you'll see Mchat has been added as a live communication portal for trial, and the Main forum Links are listed below.
Gilding Precast Letters
Moderators: Ron Percell, Mike Jackson, Danny Baronian
Gilding Precast Letters
Dan
"The lyf so short, the craft so long to lerne."
Geoffrey Chaucer (c. 1340 - 1400)
http://DanSeeseStudios.com
http://www.DanSeeseStudios.com/blog/
http://www.facebook.com/DanSeeseStudios
"The lyf so short, the craft so long to lerne."
Geoffrey Chaucer (c. 1340 - 1400)
http://DanSeeseStudios.com
http://www.DanSeeseStudios.com/blog/
http://www.facebook.com/DanSeeseStudios
-
- Posts: 1213
- Joined: Thu Apr 08, 2004 4:18 am
Re: Gilding Precast Letters
Give Tony Segale a call...he's probably doing it as we speak.
Seems he's got it all figured out.
Seems he's got it all figured out.
-
- Posts: 7
- Joined: Sat Aug 17, 2013 6:08 am
- Location: Roskilde, Denmark
- Contact:
Re: Gilding Precast Letters
Hi Dan
I'm not sure what material you are going to gild on...
But I hav been doing outdoor gilding for the last 24 years.
In my experince you can do gilding on anything you can paint...
To achieve the best results you need to prepare the surface as for a paint job. Sanding and priming using a suitable primer, sanding again and finish of by applying 2 coats of gloss or hi gloss paint for outdoor use. The smoother and shinier the surface, the shinier the finished gold.
Gild using a oilbased goldsize, I prefeer a 12 hour size mixed 50/50 with French turpentine. Apply the size evenly, in a very thin layer. Wait for the size to reach whistle tack, and gild...
I hope this can help you..
Otherwise let me know..
Jes
I'm not sure what material you are going to gild on...
But I hav been doing outdoor gilding for the last 24 years.
In my experince you can do gilding on anything you can paint...
To achieve the best results you need to prepare the surface as for a paint job. Sanding and priming using a suitable primer, sanding again and finish of by applying 2 coats of gloss or hi gloss paint for outdoor use. The smoother and shinier the surface, the shinier the finished gold.
Gild using a oilbased goldsize, I prefeer a 12 hour size mixed 50/50 with French turpentine. Apply the size evenly, in a very thin layer. Wait for the size to reach whistle tack, and gild...
I hope this can help you..
Otherwise let me know..
Jes
Re: Gilding Precast Letters
Thank you, Larry. I will give that Segale fellow a call!
Jes, thanks for your advice as well. I've done a fair amount of gilding myself but the particular surface I am looking at is precast concrete. A mold is made of the letters and formed into the concrete. It's just a surface I haven't worked with and want to be sure I have all the facts in place before submitting a bid.
I did talk with Kent Smith about it briefly and was able to get some good advice from him. One of my concerns is properly sealing the concrete so that it will accept the gold size as well as minimize lime leaching out in the future.
Jes, thanks for your advice as well. I've done a fair amount of gilding myself but the particular surface I am looking at is precast concrete. A mold is made of the letters and formed into the concrete. It's just a surface I haven't worked with and want to be sure I have all the facts in place before submitting a bid.
I did talk with Kent Smith about it briefly and was able to get some good advice from him. One of my concerns is properly sealing the concrete so that it will accept the gold size as well as minimize lime leaching out in the future.
Dan
"The lyf so short, the craft so long to lerne."
Geoffrey Chaucer (c. 1340 - 1400)
http://DanSeeseStudios.com
http://www.DanSeeseStudios.com/blog/
http://www.facebook.com/DanSeeseStudios
"The lyf so short, the craft so long to lerne."
Geoffrey Chaucer (c. 1340 - 1400)
http://DanSeeseStudios.com
http://www.DanSeeseStudios.com/blog/
http://www.facebook.com/DanSeeseStudios