hand gilded boat name with v-carved effect

An interactive section of TheLetterheads.com

Topics include: Sign Making, Design, Fabrication, Letterheads, Sign Books.

Off Topic Posts may be deleted at the discretion of the web hosts. ABSOLUTELY NO SHARING OF COPYRIGHTED FONTS, CLIP ART, or VIDEOS!

Please take social chit-chat elsewhere!

Moderators: Danny Baronian, Mike Jackson

Post Reply
Henry Reynolds
Posts: 1
Joined: Tue Mar 03, 2015 2:06 pm

hand gilded boat name with v-carved effect

Post by Henry Reynolds » Tue Mar 03, 2015 2:33 pm

Hello all,
I was looking for a technique I have seen on a few boat names. Hand gilded name with a
v-carved look. The gold looks as if it is manipulated in 2 or 3 different directions. Very realistic. I actually had to walk up to one name and touch it to find out that it was not actually carved. I have been hand painting for 30 years. Any help on this technique would be greatly appreciated.
Thank you,
Henry R.

Andrew Lawrence
Posts: 56
Joined: Sat Jun 29, 2013 1:06 pm

Re: hand gilded boat name with v-carved effect

Post by Andrew Lawrence » Tue Mar 03, 2015 8:07 pm

Was probably just directional burnishing. Dan Seese wrote a good article on it (albeit on glass)
http://www.danseesestudios.com/blog/201 ... ealed.html

Noel Weber & I did this one a few weeks back. Depending on whether it's getting direct or indirect light, and what the light source is changes the effect where some areas are darker, others lighter etc.
Attachments
IMG_2622.jpg
IMG_2622.jpg (51.28 KiB) Viewed 2455 times

vance galliher
Posts: 307
Joined: Mon Apr 12, 2004 11:38 pm
Location: springfield, or.
Contact:

Re: hand gilded boat name with v-carved effect

Post by vance galliher » Tue Mar 03, 2015 11:58 pm

or if you're doing a surface gild... it could look like this. midgleys letters are 1.5" hdu flat cut.


after rereading your post henry...you asked for a v-carved look, not prismatic
Attachments
midgleys 700 pixsels.png
midgleys 700 pixsels.png (290.4 KiB) Viewed 2388 times
vance
dimensional and glass art signs
http://www.vancegallihersigns.com

Lee Littlewood
Posts: 219
Joined: Thu Apr 15, 2004 2:36 pm
Location: Portland, Oregon
Contact:

Re: hand gilded boat name with v-carved effect

Post by Lee Littlewood » Sat Mar 21, 2015 12:39 am

Andrew - is MING all 23K with different directions of burnish? It looks like the thin lines dividing the letters are 2k burnish too (?).
where am i? Now, when i need me...

Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests