1918 mirroring forensics

An interactive section of TheLetterheads.com

Topics include: Sign Making, Design, Fabrication, Letterheads, Sign Books.

Off Topic Posts may be deleted at the discretion of the web hosts. ABSOLUTELY NO SHARING OF COPYRIGHTED FONTS, CLIP ART, or VIDEOS!

Please take social chit-chat elsewhere!

Moderators: Danny Baronian, Mike Jackson

Post Reply
Patrick Mackle
Posts: 469
Joined: Thu Apr 08, 2004 10:21 am
Location: Monrovia, Ca.
Contact:

1918 mirroring forensics

Post by Patrick Mackle » Wed Oct 17, 2018 9:26 pm

I am always trying to learn about antique mirrors and their early processes. The gods were gracious last night!!!
The ONLY THING BETTER would have been if the were backed in PERIOD NEWSPAPERS! lol
I will try to load photos, as for now I am experiencing some problems with uploading.

I just acquired two antique mirrors from a hall stand. They are just plain old silvered mirrors, BUT THEY SPOKE VOLUMES about their manufacture. They are date stamped "1918" and a partial star logo with the words "PATENT SILVER". They are on 5/16" "boiler plate" glass, a nice vaseline green tint in their thickness. Each was scored and cut with a DIAMOND TIPPED CUTTER. They were ground perfectly flat and optically repolished on both sides for good mirror quality. Each was cut from clear glass to size and shape and then silvered. This is seen in the tarnished silver run off left on the edge of the glass, plus the backing paint also has drips over the edge. BEST OF ALL, there remains amounts of the fine dry RED ROUGH used within the shop to polish beveled glass. It may have also been used in place of whiting to work the glass completely clean prior to silvering. The mirror was made in these steps: cleaned, tinned, silvered, dried, brushed with a thin coat of orange shellac, and then brushed with a thin coat of white lead oxide mixed into boiled Linseed oil and allowed to dry, then a final thin coat of brown litharge(termed as "massicot") mixed in boiled linseed completed the mirror backing protection. I tested a small area of the backing paint with a Q-Tip dipped in lacquer thinner, Acetone, and one in Denatured Alcohol and NONE of them had ANY EFFECT in dissolving or even disturbing that backing paint. INCREDIBLE!! I am beginning to think that NOTHING common with redissolve boiled linseed oil once it completely cures, even through these past decades.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest