first time using LeFrancs and having trouble.

An interactive section of TheLetterheads.com

Topics include: Sign Making, Design, Fabrication, Letterheads, Sign Books.

Off Topic Posts may be deleted at the discretion of the web hosts. ABSOLUTELY NO SHARING OF COPYRIGHTED FONTS, CLIP ART, or VIDEOS!

Please take social chit-chat elsewhere!

Moderators: Danny Baronian, Mike Jackson

Post Reply
Michael Hauxwell
Posts: 1
Joined: Thu Jun 06, 2019 5:07 pm

first time using LeFrancs and having trouble.

Post by Michael Hauxwell » Thu Jun 06, 2019 6:23 pm

Hi everyone,

This is my first post on the site and I was hoping for some guidance and advice on using Lefrancs 12 hour size. I'm a complete beginner and any thoughts are welcome.

So, I'm using the new updated version of the Lefrancs 12 hour formula. Firstly i cleaned the glass three times with Bon ami, then i applied the gold size straight from the can. (No straining of the product involved) From that the size has left streaky brush marks and spots that kind of look like dust/air bubbles.

I used a flat quill in applying the size; photographs were taken fours after application with no sign evening out.

Was it a combination of applying the product too thickly and neglecting a crucial step in straining the size?
Attachments
FORUM 3.jpeg
FORUM 3.jpeg (161.53 KiB) Viewed 2962 times
FORUM 2.jpeg
FORUM 2.jpeg (175.18 KiB) Viewed 2962 times
FORUM.jpeg
FORUM.jpeg (174.78 KiB) Viewed 2962 times

John Smith
Posts: 19
Joined: Wed Aug 16, 2017 7:11 pm
Location: Kissimmee, Florida
Contact:

Re: first time using LeFrancs and having trouble.

Post by John Smith » Fri Jun 07, 2019 8:30 am

I am not familiar with putting an oil based size on glass.
only water size with the appropriate gelatin.

but - regardless of the substrate, I would thin oil size a little and
definitely strain it.
this could also be airborne dust in the room you are working in.
if at all possible, when I am using a 12 hour size, I try to cover it
with something to help keep it clean during the setting time.
like a small tent with newspaper, etc.

gilding is an art that takes tons of practice to finally get it right.
keep trying - you'll get there.

.

.
Kings Bay Signs
Kingsland, GA ~ 1980-2008 (Retired)

Doug Bernhardt
Posts: 1027
Joined: Fri Apr 09, 2004 9:29 am
Location: Ottawa Canada
Contact:

Re: first time using LeFrancs and having trouble.

Post by Doug Bernhardt » Wed Jun 26, 2019 5:01 pm

Definitely too much size...just a nice whisper thin coat is what you want.

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 9 guests