Hi everyone,
This is my first post on the site and I was hoping for some guidance and advice on using Lefrancs 12 hour size. I'm a complete beginner and any thoughts are welcome.
So, I'm using the new updated version of the Lefrancs 12 hour formula. Firstly i cleaned the glass three times with Bon ami, then i applied the gold size straight from the can. (No straining of the product involved) From that the size has left streaky brush marks and spots that kind of look like dust/air bubbles.
I used a flat quill in applying the size; photographs were taken fours after application with no sign evening out.
Was it a combination of applying the product too thickly and neglecting a crucial step in straining the size?
Welcome to The Hand Lettering Forum!
This is an interactive Bulletin Board on the topics of Sign making, design, fabrication, History, old Books and of coarse Letterheads, Keepers of the craft. The Hand Lettering Forum features links to resources, sign art history, techniques, and artists profiles. Learn more about Letterheads at https://theletterheads.com. Below you'll see Mchat has been added as a live communication portal for trial, and the Main forum Links are listed below.
This is an interactive Bulletin Board on the topics of Sign making, design, fabrication, History, old Books and of coarse Letterheads, Keepers of the craft. The Hand Lettering Forum features links to resources, sign art history, techniques, and artists profiles. Learn more about Letterheads at https://theletterheads.com. Below you'll see Mchat has been added as a live communication portal for trial, and the Main forum Links are listed below.
first time using LeFrancs and having trouble.
Moderators: Ron Percell, Mike Jackson, Danny Baronian
-
- Posts: 1
- Joined: Thu Jun 06, 2019 5:07 pm
first time using LeFrancs and having trouble.
- Attachments
-
- FORUM 3.jpeg (161.53 KiB) Viewed 14872 times
-
- FORUM 2.jpeg (175.18 KiB) Viewed 14872 times
-
- FORUM.jpeg (174.78 KiB) Viewed 14872 times
-
- Posts: 19
- Joined: Wed Aug 16, 2017 7:11 pm
- Location: Kissimmee, Florida
- Contact:
Re: first time using LeFrancs and having trouble.
I am not familiar with putting an oil based size on glass.
only water size with the appropriate gelatin.
but - regardless of the substrate, I would thin oil size a little and
definitely strain it.
this could also be airborne dust in the room you are working in.
if at all possible, when I am using a 12 hour size, I try to cover it
with something to help keep it clean during the setting time.
like a small tent with newspaper, etc.
gilding is an art that takes tons of practice to finally get it right.
keep trying - you'll get there.
.
.
only water size with the appropriate gelatin.
but - regardless of the substrate, I would thin oil size a little and
definitely strain it.
this could also be airborne dust in the room you are working in.
if at all possible, when I am using a 12 hour size, I try to cover it
with something to help keep it clean during the setting time.
like a small tent with newspaper, etc.
gilding is an art that takes tons of practice to finally get it right.
keep trying - you'll get there.
.
.
Kings Bay Signs
Kingsland, GA ~ 1980-2008 (Retired)
Kingsland, GA ~ 1980-2008 (Retired)
-
- Posts: 1077
- Joined: Fri Apr 09, 2004 9:29 am
- Location: Ottawa Canada
- Contact:
Re: first time using LeFrancs and having trouble.
Definitely too much size...just a nice whisper thin coat is what you want.