Silvering with Hand Held Triger Sprayers

[Ismael Alvarado]

I just uploaded 2 videos of the wetting agent doing its thing, the video was taken a few weeks ago with a different camara which I just had access to it.

first video of a piece without wetting agent
http://youtu.be/LJXiuPnfx98

now with the wetting agent
http://youtu.be/_vHud7n6gnU

[erik winkler]

Ismael,

I just found a great tool for you.
You have mentioned that you do not trust your spraygun due to oil and water conteminations.
Therefore you use the handguns etc. which are just for small stuff.
If you want to professionalize the compressed vair easily you can use this tool:]
http://www.autobodytoolmart.com/motorgu ... 11897.aspx
The only filter to use is a new toilet paper roll.
If it is getting dirty, replace the old for a new one.

Again a lot of money, but thought you might be interested.

Erik

[Ismael Alvarado]

Ismael,

I just found a great tool for you.
You have mentioned that you do not trust your spraygun due to oil and water conteminations.
Therefore you use the handguns etc. which are just for small stuff.
If you want to professionalize the compressed vair easily you can use this tool:]
http://www.autobodytoolmart.com/motorgu ... 11897.aspx
The only filter to use is a new toilet paper roll.
If it is getting dirty, replace the old for a new one.

Again a lot of money, but thought you might be interested.

Erik

Thanks for the tips Erik

[erik winkler]

I like to help people who bite in their problems and do not let loose untill they have the solution.

[Ismael Alvarado]

ok guys a few more videos(back to spoons..)

here is the ChromeFx topcoat(tinted as good as it gets)
http://www.youtube.com/watch?v=Y0YP1zcShew

and here is the diference between a tinted clear and a none tinted clear
http://www.youtube.com/watch?v=MqsJ9jqVCx0

and a bunch of spoons I did because people ask me if I have small samples to give away...

http://www.youtube.com/watch?v=zX6ZDp7o ... ure=relmfu

[Sarah King]

Marvin, you certainly are dedicated to making this work. I'm very impressed.

The reason we don't carry the red dual chamber spray bottles any more is because they get clogged very easily. The silver and the reducer tubes mix the chemicals together inside the nozzle which causes silver metal to build up inside the sprayer. You have to take the whole assembly apart to clean it out almost every time you use it.

That's why we invented the Pump Spray Kit which acts just like Paasche's dual chamber gun where the chemicals mix together outside the sprayer. There are no parts to clean and no air compressor. We have a video of the Pump Sprayer on our website at http://angelgilding.com/PumpSpraySilverVideo.html Also the Pump Sprayer holds twice as much silver and the red sprayer - and half as much silver as the Paasche spay bottles. It's our latest attempt to make the mirroring process as simple as possible.

[Ismael Alvarado]

Marvin, you certainly are dedicated to making this work. I'm very impressed.

The reason we don't carry the red dual chamber spray bottles any more is because they get clogged very easily. The silver and the reducer tubes mix the chemicals together inside the nozzle which causes silver metal to build up inside the sprayer. You have to take the whole assembly apart to clean it out almost every time you use it.

thanks mrs. king, as of today I have no issues with my spray bottles, I clean them with a diluted hydrochloric acid.. I have done lots of work with them(check my youtube chanel, nicamarvin) I have not updated this thread for quite some time, now..

here some updates...

I finished the pieces just now.. they will be ready to go tomorrow

before clear





after clear..




I´m uploading some videos I´ll post them later

updates from these pieces...












http://www.youtube.com/embed/VEcX_NVu8lQ

http://www.youtube.com/embed/aV6dcV-XVGY

[Ismael Alvarado]

some pics of my recen work..